BI15-M30-WS
Product type: inductive sensor
Installation method: non-embedded
Detection distance (mm): 15mm
Ensure the distance (mm): 0 ... 12.15mm
Output mode: Two-wire
Protection level: IP67
- General specifications
- Switching function Normally open (NO)
- Output type：Two-wire
- Rated operating distance：15 mm
- Installation：quasi flush
- Output polarity：AC
- Assured operating distance：0 ... 12.15 mm
- Actual operating distance：13.5 ... 16.5 mm
- Reduction factor rAl：0.33
- Reduction factor rCu：0.28
- Reduction factor r304：0.81
- Output type：2-wire
- Nominal ratings
- Operating voltage：20 ... 253 V
- Switching frequency：0 ... 20 Hz
- Hysteresis：typ. 5 %
- Reverse polarity protection：reverse polarity tolerant
- Voltage drop：< 5 V (IL > 50 mA); < 8 V (IL < 50 mA)
- Momentary current
- (20 ms, 0.1 Hz)：0 ... 1600 mA
- Operating current：5 ... 200 mA
- Off-state current：0 ... 1.7 mA
- Operating voltage indicator：LED, green
- Switching state indicator：LED, yellow
- Ambient conditions
- Ambient temperature：-25 ... 70 °C (-13 ... 158 °F)
- Mechanical specifications
- Connection type：cable PVC , 2 m
- Core cross-section：0.75 mm2
- Housing material：brass, nickel-plated
- Sensing face：PBT
- Degree of protection：IP67
- Cable：
- Cable diameter：6.4 mm ± 0.2 mm
- Bending radius：> 10 x cable diameter
- Note：1) In the temperature range below 0 °C, permissible operating voltage Ub 80...253 V
- Safety fuse ≤ 0.3 A (quick-blow) according to IEC 60127-2 Sheet 1
- Recommendation: after a short circuit, check that the device is functioning correctly.
尺寸图
接线图
Recommend
BI4-M12-10
Installation method: non-embedded
Detection distance: 4mm
Output type：NPN
BI2-M12-12
Installation method: non-embedded
Detection distance: 2mm
Output type：PNP
BI15-M30-10
Installation method: non-embedded
Detection distance: 15mm
Output type：NPN